IBM XIV Storage System Service Manual

2812-A14 7803483

technician/teChn1cian
admin/adminadmin

Both XCLI and IBM XIV Storage Management GUI management is run over TCP port 7778.

Module

Module USB-to-serial connections

USB-1 port in module 1 connects to Serial port in Module 3.
USB-1 port in module 2 connects to Serial port in Module 1.
USB-1 port in module 3 connects to Serial port in Module 2.

And so on for each group of 3 modules.
1-3, 4-6, 7-9, 10-12, 13-15

USB-2 port in module 5 connects to Swtich 1 (Lower switch).
USB-2 port in module 6 connects to Swtich 2 (Upper switch).
USB-2 port in module 1 connects to UPS 1 (Lower UPS).
USB-2 port in module 2 connects to UPS 2 (Middle UPS).
USB-2 port in module 3 connects to UPS 3 (Upper UPS).
USB-2 port in module 4 connects to ATS.

Shutdown & Startup

Shudown:

System > System Settings > Shutdown System.
Waitting all leds are off.
Turn off all 3 output circuit breakers on all 3 UPSes.
Power off all 3 UPSes.
Unplug left side battery on all 3 UPSes.
Turn off all 4 output circuit breakes on ATS.

Startup:

Check ATS power source input led is ok.
Plug left side battery on all 3 UPSes.
Turn on all 4 output circuit breakes on ATS, check output led is ok.
Turn on all 3 output circuit breakers on all 3 UPSes.
Press the 3 "Test" buttons simultaneously on all 3 UPSes.
Waitting system startup.

XCLI

> C:\xcli -c my_system -u technician -p technician event_list
disk_list
module_list
switch_list
mm_list
ups_list
ats_list

> C:\xcli -c my_system -u technician -p technician component_phaseout component=1:module:1 markasfailed=yes
> C:\xcli -c my_system -u technician -p technician component_test component=1:module:1
> C:\xcli -c my_system -u technician -p technician component_list filter=notok
> C:\xcli -c my_system -u technician -p technician component_phasein component=1:module:1

> C:\xcli -c my_system system_data_collect
> C:\xcli -c my_system system_data_get_status